Products

48v TUNNEL RANGE  **NEW**

The x-Glo LED Lighting Tunnel Range is our latest product to be developed, based on what our tunnelling and tunnel construction customers have asked for.  The individual strip lengths can be ordered in 5/10/20m increments.  When linked together provide a continuous light spanning up to 400m between power supplies.

Each 5/10/20m length is pre-fitted with quick connectors on each end, making it easy to connect or decouple the LED light strips together, as required.  In a tunnel construction environment, this makes it easy to progressively install the LED strip as the tunnel gets built out.

The LED light strip is IP67 rated and encased into a solid silicon extrusion with nanotech dust and dirt retardant properties to keep these LED lights shining brighter in the harshest environments.

Click on the links below for further information:

48V Tunnel Range

Standard Range 

The x-Glo LED Lighting Standard range is used mainly in mining where there is sufficient access to 240v power for the 12, 24, 36 or 48v AC/DC power supplies. Each strip is typically powered from both ends for maximum run lengths and provides redundancy if the LED strip is accidentally cut or damaged.

Run lengths depending on the lumens required, range from 42 to 90m.  These LED Light strips can be cut to size at 10-15cm intervals to suit your specific length requirements and can be done on-site.

Available in a Silicon or PVC extrusion with nanotech dust and dirt retardant properties to keep these LED Lights shining brighter in the harshest environments.

Click on the links below for further information:

Standard (STD)

Long Range

This LED lighting product is used mainly when there is limited access to 240v power allowing longer run lengths between the 24, 36 AC/DC volt power supplies. Often used in tunnelling, tunnel construction, mining declines and drifts.

Being able to span over longer lengths between power supplies means less power infrastructure needed, making it less expensive and faster to install.  When powering the LED light strip from both ends the maximum run lengths are doubled.  This also provides redundancy if the LED light strip is accidentally cut or damaged.

Based on the lumens required the run lengths range from 80 to 168m.

These LED light strips can be cut to size at 10-15cm intervals to suit your specific length requirements and can be done on-site.

Available in a Silicon or PVC extrusion with nanotech dust and dirt retardant properties to keep these LED lights shining brighter in the harshest environments.

Click on the links below for further information:

Long Range (LR)

IECEx Range

The x-Glo EXM LED light strip is the  ONLY IECEx certified LED strip light available today.

The x-Glo EXM LED light strip has been specifically developed and IECEx certified for oil, gas, coal mines, explosive magazines and hazardous industrial areas, such as paint manufacturing, tanks and high dust zones.

Being an IECEx product each LED strip needs to be pre-ordered and manufactured to the required length. Each IECEx light strip can only span a maximum of 30m between power supplies and can be powered with 24, 36, 48v AC or DC IECEx approved power supplies.  Available in Silicon only with dust and dirt retardant properties as standard.

Click on the links below for further information:

Accessories (for STD and LR products only)

MineGlow has a range of accessories giving you a wide range of LED light strip installation options based on your requirements.  All of these accessories can either be factory fitted, on-site or post installation.

These industrial grade LED light strip accessories are all IP67 rated whether they are factory fitted or on-site.

Click on the links below for further information:


Total Metres sold to date

0